4-8
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 4 Administering Cisco Secure ACS Solution Engine
Working with System Data
For more information on ACS SE commands, see
Appendix C, “Command Reference.”
Working with System Data
This section explains basic data-manipulation tasks performed from a serial console connected to the
ACS SE:
•
Obtaining Support Logs From the Serial Console, page 4-9
•
Exporting Logs, page 4-10
•
Exporting a List of Groups, page 4-11
•
Exporting a List of Users, page 4-12
•
Backing Up ACS Data From the Serial Console, page 4-12
ntpsync
Perform Network Time Protocol synchronization
ping
Verify connections to remote computers
reboot
Soft reboot appliance
restart
Restart ACS services
restore
Restore Appliance
rollback
Rollback patched package
set admin
Set administrator's name
set dbpassword
Set database password
set domain
Set DNS domain
set hostname
Set appliance's hostname
set ip
Set IP configuration
set password
Set administrator's password
set time
Set timezone, enable NTP synch, or set date and
time
set timeout
Set the timeout for serial console with no activity
show
Show appliance status
shutdown
Shut down appliance
start
Start ACS services
stop
Stop ACS services
support
Collect logs, registry, and other useful
information
tracert
Determine the route take to a destination
upgrade
Upgrade appliance (stage II)
Table 4-1
ACS SE Commands (continued)
Command
Description
