4015259 Rev C
21
How Do I Install USB Drivers?
How Do I Install USB Drivers?
To install USB drivers, your PC must be equipped with a USB network interface and
a Microsoft Windows 2000 or Windows XP operating system. This section contains
instructions for installing the USB drivers for the cable modem.
Note:
If you are not using the USB interface, skip this section.
Installing USB Drivers
The USB driver installation procedures are different for each operating system.
Follow the appropriate instructions in this section for your operating system.
Installing USB Drivers on Windows 2000 Systems
1
Insert the
USB Cable Modem Driver Installation Disk
into the CD-ROM drive
of your PC.
2
Wait until the
POWER
and
ONLINE
LED status indicators on the front panel of
the cable modem illuminate solid green.
3
Click
Next
in the Found New Hardware Wizard window.
4
Select
Search for a suitable driver for my device (recommended)
in the Found
New Hardware Wizard window, and then click
Next
.
5
Select
CD-ROM drives
in the Found New Hardware Wizard window, and then
click
Next
.
6
Click
Next
in the Found New Hardware Wizard window. The system searches
for the driver file for your hardware device.
7
After the system finds the USB driver, the Digital Signature Not Found window
opens and displays a confirmation message to continue the installation.
8
Click
Yes
to continue the installation. The Found New Hardware Wizard
window reopens with a message that the installation is complete.
9
Click
Finish
to close the Found New Hardware Wizard window. The USB
drivers are installed on your PC, and your USB devices are ready for use.
10
Try to access the Internet. If you cannot access the Internet, go to
Having
Difficulty?
(on page 25). If you still cannot access the Internet, contact your
service provider for further assistance.
Installing USB Drivers on Windows XP Systems
1
Insert the
USB Cable Modem Driver Installation Disk
into the CD-ROM drive
of your PC.
2
Wait until the
POWER
and
ONLINE
LED status indicators on the front panel of
the cable modem illuminate solid green.
3
Select
Install from a list or specific location (Advanced)
in the Found New
Hardware Wizard window, and then click
Next
.
