4021192 Rev B
41
Configure Wireless Settings
Section
Field Description
Basic Settings
Wireless Network
Enable
or
Disable
the wireless network
Wireless Configuration
The default is
WPS
. See
Wi-Fi Protected Setup (WPS)
(on page 38) for more
information about using WPS.
Select
Manual
to manually set up your network using this option.
Network Mode
Choose one of these options for the network mode:
G only, B/G Mixed, B/G/N Mixed
(factory default)
Important:
When TKIP authentication only is selected, B/G/N Mixed network
mode is not available.
Radio Band
Select
Enabled 2.4GHz
(factory default) or
Enabled 5GHz
Note:
The 5GHz radio band may not be supported on some models.
Channel Width
Choose
Standard - 20 MHz Channel
or
Wide 40 MHz Channel
Standard Channel
Select one of the channels from the drop-down list to correspond with your
network settings. All devices in your wireless network must broadcast on the
same channel in order to communicate. You can select
Auto
(factory default) for
automatic channel selection.
