Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
dsl-group
71
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
In ATM mode
IMA DSL Group
•
Available links: 0, 1, 2, 3
Any combination of the numbers 0, 1, 2, and 3
For example:
To use all available pairs , use:
dsl-group 0 pairs 0-3 ima
To use only two pairs (such as 0 and 1), use:
dsl-group 0 pairs 0-1 ima
M-Pair DSL Group
Available options:
–
0-1
–
0-2
–
0-3
–
2-3
For example:
To use all available pairs , use:
dsl-group 0 pairs 0-3 m-pair
To use only two pairs (such as 0 and 1), use:
dsl-group 0 pairs 0-1 m-pair
1-Pair DSL Group
•
Available links: 0, 1 ,2, 3
In the case of 1-pair DSL group (2-wire), only one pair needs to be configured.
For example:
To use link 0, use:
dsl-group 0 pairs 0
auto
Automatically assigns the Central Office’s (CO) wire configuration to an ATM DSL
group (EHWIC-4SHDSL-EA, HWIC-4SHDSL) or EFM DSL group
(EHWIC-4SHDSL-EA) on the Customer Premise Equipment (CPE).
Usage
When using
dsl-group
, you must do one of the following:
•
Specify the group manually:
Example:
dsl-group 0 pair 0-3 efm-bond
or
•
Use the auto option:
Example:
dsl-group auto
ima
Defines the DSL group as the IMA bonding group.
m-pair
Defines the DSL group as m-pair.
efm-bond
Defines the DSL group as Ethernet First Mile (EFM) group bonding group.
default
(Optional) Sets a command to the default values.
shdsl
(Optional) Configures the symmetric g.shdsl.
4-wire
(Optional) Configures the 4-wire symmetric G.SHDSL.
annex
(Optional) Configures the annex symmetric G.SHDSL.
rate
(Optional) Configures the DSL group SHDSL rate.
