Table 1: Firepower 1120, 1140, and 1150 Features
1150
1140
1120
Feature
The following certifications apply to the 1120 and 1140. The 1150 has not yet
been qualified for these certifications:
• Common Criteria (CC) on FTD 6.4.
x
and FX-OS 2.6.
x
• Federal Information Processing Standards (FIPS) 140-2 on FTD 6.4.
x
and
FX-OS 2.6.
x
• Department of Defense Information Network Approved Product List (DoDIN
APL)
• US Government Compliance for IPv6 (USGv6) on FTD 6.4.
x
See the "Security Certifications Compliance" chapter in the
Management Center Configuration Guide, Version 6.7
for the FMC procedures
to enable security modes.
Security standards
certifications
1 RU
Form factor
Rack mount
4-post Electronic Industries Association (EIA)-310-D rack
Mounting
Front panel to rear panel (cold aisle to hot aisle)
Airflow
One 16-core Intel CPU
One 12-core Intel CPU
Processor
32-GB DDR4 DRAM
16-GB DDR4 DRAM
Memory
One Gigabit Ethernet RJ-45 10/100/1000 BaseT
Restricted to network management access only
Management port
One RJ-45 or one USB Mini B
Provides management access through an external system
Console ports
One USB 3.0 Type A
Allows attachment of an external device such as mass storage
USB port
Eight Gigabit Ethernet RJ-45 10/100/1000 BaseT
Each RJ-45 (8P8C) copper port supports auto Medium Dependent Interface
Crossover (MDI/X) as well as auto-negotiation for interface speed, duplex, and
other negotiated parameters, and are MDI/X-compliant.
Port numbering is left to right, top to bottom; ports are named Gigabit Ethernet
1/1 through 1/8. Each port includes a pair of LEDs, one each for connection status
and link status.
Network ports
Cisco Firepower 1100 Series Hardware Installation Guide
2
Overview
Features
