QSFP-4X10G-AC
40G-4X10G-CU-A, 7M, 10M
QSFP-H40G-AOC
40G-AOC, 1M, 2M, 3M, 5M, 7M, 10M, 15M
Hardware Specifications
The following table contains hardware specifications for the Firepower 4100.
Table 11: Firepower 4100 Hardware Specifications
4150
4140
4120
4110
Specification
Physical
1 RU
Fits standard 19-inch (48.3-cm) square-hole rack
Form factor
Mount rails included
4-post EIA-310-D rack
Rack mount
1.75 x 16.89 x 29.7 inches (4.44 x 42.90 x 75.43 cm)
1.75 x 16.89 x 31.52 inches (4.44 x 42.90 x 80.06 cm) with fans
Dimensions (H x W
x D)
36 lb (16 kg) two power supply modules, two network modules, 6 six fans
30 lb (13.6 kg) no power supply modules, no network modules, no fans
Weight
Storage
200 GB
The storage SSD must be
installed in slot 1. Slot 2 is
reserved for the optional MSP
SSD.
Note
If you are running Firepower
Threat Defense software, we
recommend that you upgrade to
the latest version (at least to
Version 6.1.0) to take
advantage of software updates
that enhance SSD management
performance and longevity.
Note
100 GB
The storage SSD must be
installed in slot 1. Slot 2 is
reserved for the optional MSP
SSD.
Note
If you are running Firepower
Threat Defense software, we
recommend that you upgrade to
the latest version (at least to
Version 6.1.0) to take
advantage of software updates
that enhance SSD management
performance and longevity.
Note
SSD
800 GB
The optional MSP SSD must be installed in slot 2.
Note
MSP
Memory
256 GB
128 GB
64 GB
DDR4 DIMM
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
27
Overview
Hardware Specifications