![background image](http://html.mh-extra.com/html/cisco/gigabit-switch-router-cisco-12012/gigabit-switch-router-cisco-12012_installation-and-configuration-manual_65984175.webp)
Observing System Startup and Performing a Basic Configuration 4-15
Configuring the Cisco 12012
Configuring global parameters:
Enter host name: Router
Enter enable secret: barney
Enter enable password: wilma
Enter virtual terminal password: bambam
Configure IP?: yes
Configure IGRP routing?: yes
Your IGRP autonomous system number [1]: 199
Configure SNMP Network Management?: yes
Community string [public]:
Configure CLNS? [no]: yes
CLNS router tag [area_1]:
CLNS domain [49]:
CLNS area [0001]:
CLNS station id [0027.25E9.B640]:
This completes the portion of the setup facility for configuring global parameters. The setup
facility continues for configuring interfaces; refer to the following section.
Configuring Interfaces
This section provides steps for configuring installed interfaces (using the setup facility or
setup command facility) to allow communication over your external networks. To
configure the interface parameters, you need your interface network addresses, subnet mask
information, and you need to know which protocols you want to configure; consult with
your network administrator for this information. (For additional interface configuration
information on each of the line cards available for the Cisco 12012, refer to the individual
configuration notes that shipped with your line cards.)
Note
The examples in this section represent a continuation of the setup facility or the
setup command facility and are intended as examples only. Your configuration might look
differently depending on your configuration requirements.
Summary of Contents for Gigabit Switch Router Cisco 12012
