Cisco Headset 560 Series with Standard Base
Quick Reference Guide
Headset LED status indication
Incoming Call
Blinking red
Active Call
Steady red
Headset paired with dock
White LED blinking every 4 seconds
Headset and dock not paired
White LED blinking rapidly
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put
the headset on. If you remember to lower the volume before you take the headset off, the
volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important
external sounds, particularly in emergencies or in noisy environments. Don’t use the
headset while driving. Don’t leave your headset or headset cables in an area where
people or pets can trip over them. Always supervise children who are near your headset
or headset cables.
Call Indication
Incoming call
Blinking green
Active call
Steady green
Muted call
Steady red
Power/Call
Mute
/-
Base LED status indication
Battery strength
LEDs show solid as battery charges
System updating
LEDs blink in sequence from left to right
Headset and dock not paired
All LEDs blinking
