Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
19
Book Title
DETAILED STEPS
Configuring a Fast Ethernet Interface as a Layer 2 Trunk
Use this task to configure a Fast Ethernet interface as a Layer 2 trunk.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface fastethernet
interface-id
4.
shutdown
5.
switchport mode trunk
6.
switchport trunk native
vlan
vlan-num
7.
switchport trunk allowed vlan
{
add
|
except
|
none
|
remove
}
vlan1
[
,
vlan
[
,
vlan
[
,
...]]
8.
no shutdown
9.
end
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface fastethernet
interface-id
Example:
Router(config)# interface fastethernet 0/1/0
Selects the interface to be configured.
Step 4
description
string
Example:
Router(config-if)# description newinterface
Adds a description for an interface.