Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
49
Book Title
Configuring and Verifying the Aging Timer
The aging timer may be configured from 16 seconds to 4080 seconds, in 16-second increments.
Follow these steps to configure the aging timer.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
mac-address-table
aging-time
time
4.
end
5.
show mac-address-table
aging-time
DETAILED STEPS
Example
Use the
show mac
-
address
-
table aging
-
time
command to verify the MAC address table aging timer, as
illustrated below:
Router #
show mac-address-table aging-time
Mac address aging time 320
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
mac-address-table aging-time
time
Example:
Router(config)# mac-address-table aging-time
4080
Configures the MAC address aging timer age in seconds.
•
The range is 0 to 10000 seconds.
Step 4
end
Example:
Router(config)# end
Returns to privileged EXEC mode.
Step 5
show mac-address-table
aging-time
Example:
Router# show mac-address-table aging-time
Verifies the MAC address table.
