![background image](http://html.mh-extra.com/html/cisco/hwic-4esw-etherswitch-hwic-switch/hwic-4esw-etherswitch-hwic-switch_user-manual_65991067.webp)
Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
How to Configure EtherSwitch HWICs
67
Book Title
Configuring a Multicast Router Port
Follow the steps below to enable a static connection to a multicast router.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip igmp snooping vlan
vlan-id
mrouter
{
interface
interface-id
|
learn
pim-dvmrp
}
4.
end
5.
show ip igmp snooping
6.
show ip igmp snooping mrouter
[
vlan
vlan-id
]
7.
copy running-config startup-config
DETAILED STEPS
Command
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip igmp snooping vlan
vlan-id
mrouter
{
interface
interface-id
|
learn
pim-dvmrp
}
Example:
Router(config)#
ip igmp snooping vlan1
interface Fa0/1/1 learn pim-dvmrp
Enables IGMP snooping on the VLAN interface and enables
route discovery.
Step 4
end
Example:
Router(config)# end
Returns to privileged EXEC mode.
Step 5
show ip igmp snooping
Example:
Router# show ip igmp snooping
Displays snooping configuration.