4.
When you are installing the device, secure the wires coming from the power connector so that they cannot
be disturbed by casual contact. For example, use tie wraps to secure the wires to the rack.
WARNING:
Failure to securely tighten the captive screws can result in an electrical arc if the connector is
accidentally removed.
Statement 397
WARNING:
When you connect or disconnect the power and/or alarm connector with power applied, an
electrical arc can occur. This could cause an explosion in hazardous area installations. Be sure that all power
is removed from the device and any other circuits. Be sure that power cannot be accidentally turned on or
verify that the area is nonhazardous before proceeding.
Statement 1058
Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide
29
Connecting the Cisco IC3000
Attaching the DC Power Connectors to the Device