2
Product Overview
Cable Side
Cable Side
Figure 1
Cisco IE-5000 Cable-Side View
LEDs
For detailed information about LEDs see
LEDs, page 6
.
Display Mode Button
For detailed functionality see
Display Mode Button, page 8
.
GPS Antenna Port
GNSS Module RF Input Requirements
The GPS/GNSS input requires a GPS/GNSS receive antenna with built-in Low-Noise Amplifier (LNA) for optimal performance. The LNA
amplifies the received satellite signals to:
Compensate for cable loss
Increase the signal amplitude to a suitable range for the receiver front-end
1
LEDs
8
Power-input terminal
2
Display mode button
9
Alarm port
3
GPS antenna port
10
Console port
4
Digital Timecode I/O (IRIG)
(Not currently supported by software)
11
Four 1000 SFP/10G SFP+ Ports (Uplinks)
5
Analog Timecode I/O (IRIG)
(Not currently supported by software)
12(top)
Twelve 10/100/1000 PoE/PoE+ Ports (Downlinks)
6
USB (mini-Type B) console port
12 (bottom)
Twelve 100/1000 SFP Ports (Downlinks)
7
Time of Day (TOD) Port
(Not currently supported by software)
13
Flash memory card slot
1
4
5
12
11 10
8
13
2
6
7
3
9
349768
