6
Product Overview
Cable Side
LEDs
You can use the switch system and port LEDs to monitor switch activity and performance.
Switch Panel LEDs
Figure 4
Switch LEDs (Cable Side)
Port LEDs
Each Ethernet port has a port LED. These port LEDs, display information about the individual ports. The port mode determines the type of
information shown by the port LEDs.
Table 2 on page 7
lists the mode LEDs and their associated port modes and meanings.
To select or change a mode, press the Mode button until the desired mode is highlighted. The Mode LED will turn ON solid green when a
mode is selected and turn OFF when timeout (5 seconds) or a different mode is selected. When you change port modes, the meanings of the
port LED colors also change.
Table 3 on page 7
explains how to interpret the port LED colors in different port modes.
1
Ethernet ports
11
PSU1 and 2 (power supply 1 and 2)
2
10G Ethernet ports
12
OUT (alarm output)
3
10G Ethernet ports
13
Alarms 2 and 4
4
Display mode switch
14
Alarms 1 and 3
5
Express Setup button
15
Timecode status (not currently supported by software)
6
PoE
16
GPS status
7
Synchronous Ethernet status
17
SD (SD flash memory card)
8
Redundancy status
18
USB (mini-USB console)
9
Port duplex status
19
SYS (system)
10
Port speed status
20
SD card slot cover
1
2
4
349769
13
14
15
16
17
18
19
3
5
20
6
7
8
9
10
11
12
