16
IR510 WPAN Gateway and IR530 WPAN Range Extender Hardware Installation Guide
IR530 Series Resilient Mesh Range Extender Installation
IR530 Series Resilient Mesh Range Extender Installation
This section describes the Cisco Industrial Router 530 (IR530) Series Resilient Mesh Range Extender and includes the following topics:
Hardware Overview, page 16
IR530 Range Extender Cautions and Warnings, page 18
IR530 Range Extender Hardware Specifications, page 18
Mounting the IR530 Range Extender, page 20
Grounding the IR530 Range Extender, page 22
Hardware Overview
The Cisco IR530 Resilient Mesh Range Extender (IR530 Range Extender) provides unlicensed 902-928MHz, ISM-band IEEE
802.15.4g/e/v Wireless Personal-Area Network (WPAN) communications to diverse Internet of things (IoT) applications. It extends the
range of the RF wireless mesh network, providing longer reach between WPAN endpoints and other WPAN networks. There are two IR500
Mesh Range Extender products in the IR500 family: The IR529 and IR530. IR530 represents a high performance, new generation of the
Cisco RF Mesh range extender.
The IR530 Range Extenders take full advantage of Cisco networking expertise in IPv6, security. It provides an open, high performance RF
mesh solution based on the following standards:
IEEE 802.15.4 g/e/v
IETF 6LoWPAN
IETF Routing Protocol for Low Power and Lossy Networks (RPL)
IETF Constrained Application Protocol (CoAP).
For details on Software Specifications, Environmental Compliance, Immunity, EMC, Safety and Ingress Protection (dust/water) or to
confirm any IR530 specifications, please refer to:
Cisco IR530 Series Resilient Mesh Range Extenders Data Sheet.
Table 7
IR510 Power and Alarm Connector Pin outs
Pin
Label
Signal Description
1
V
Positive DC power connection
2
RT
Return DC power connection
3
A
Alarm Reference or Alarm IN
4
A
Alarm Reference or Alarm IN
