Cisco ISB7000, Product Manual

6

Change the Way You Watch TV

Welcome to U-verse TV. The ISB7000 and ISB7500 devices, known as U-verse receivers, bring a rich, 
new set of interactive services directly to you through your TV and your in-home IP network. The 
receiver uses the existing in-home coaxial cable wiring and connects to most entertainment devices.

With Total Home DVR service, you can:

•  Record up to four shows at once on a single DVR

•  Record and play back your shows in any room from a single DVR

•  Pause, fast-forward, and rewind recorded shows on any TV from a single DVR

•  Pause your recorded show in one room and pick it up in another

•  Play the same recorded show on diff erent TVs at the same time and control them separately

•  Store up to 233 hours of SD or 65 hours of HD content with our larger-capacity DVR—included    
  with AT&T U-verse TV U300 and U450 packages

•  Program your DVR remotely from your computer or wireless phone

Note

: Contact your service provider to fi nd out if these services are available and to activate the 

services.

What’s In the Carton?

In addition to this product manual, the receiver carton contains the following items:

•  An ISB7500 Receiver - TV receiver with a 500 GB hard drive that supports high-defi nition (HD) and 

standard-defi nition (SD) video decoding. Supports 480i, 720p, 1080i, and 1080p content. Uses 
Ethernet over CAT-5 or HPNAv3 in-home networking over coaxial or twisted-pair

 OR

An ISB7000 Receiver - The ISB7000 is the same as the ISB7500 but without a 500 GB hard 
disk drive

•  A power cord and power adapter

Safety First

Before using the receiver, read the Important Safety Instructions section of this manual.

Identify Your Receiver with the Serial Number

At times your service provider may ask for the serial number. To fi nd the serial number for your 
receiver, look on the bottom of the receiver for the label. The serial number is a 9-digit numeric 
code to the right of the letters “S/N” on the label. 

Use the space provided here to record the serial number: _______________________________

In This Manual

This manual covers the information you need to connect your receiver to both your in-home IP 
network and your entertainment system. The manual also outlines certain safeguards and installation 
information. The safety information contained in this manual was developed and provided solely by 
the receiver manufacturer, Cisco Systems, Inc.

Questions About Your Service

For questions about how to operate your receiver, once installed, refer to your 

Feature Guide 

available 

for download at: 

att.com/userguides

. For all other questions about your TV service, contact your 

service provider.