8
Front Panel
1 Power
Turns the receiver on or places it in standby. To restart the receiver,
press and hold the POWER button for 10 seconds. The LED is green
2 Model
Number
Identifi es the model number of your receiver as ISB7000 or ISB7500
3 Link
Indicates network link status. The LED is green
4 HD
Indicates the set-top is set to a resolution of 720p, 1080i, or 1080p.
The LED is blue
5 Record
Indicates that a recording is in progress. The LED is red
6 IR
Sensor
Receives the infrared signal from the remote control. The sensor is
behind the front panel
7 Menu
Accesses the on-screen menu
8 Arrow
Keys
Accesses on-screen services (such as the on-screen guide, video-on-
demand, or pay-per-view) and navigates menus
9 OK
Selects the current item
10 USB Port
USB connector. (Reserved for future use)
Note:
This illustration may vary from the actual product.
CAUTION:
Your receiver may be equipped with a hard disk drive to store programs that
you record and to allow you to rewind and pause live TV. Any time the receiver
is powered on (power LED is illuminated) or a recording is in progress (the
record LED is illuminated) the hard disk drive is in use.
If you need to move the receiver, complete the following steps to allow the
hard disk drive to shut down properly. First, make sure that no recording is
in progress (record LED is off ). Then, turn off power by pressing the Power
key. Finally, unplug the unit and wait 10 seconds for the hard disk drive to
spin down (stop). At this point the unit can be moved safely.
You should handle this product with the same level of care you would use
when handling other electronics containing a hard disk drive, such as a
laptop computer or other hard disk drive-equipped devices.
OK
OK
OK
ISB7500
T15904
1
9
2
3
4
5
6
7
10
8
Summary of Contents for ISB7000
Page 2: ...2 ...
