SGE2010/SGE2010P Administration Guide
23
System Configuration
Using the Console
SSL Generate Certificate
Use the
SSL Certificate Generation
screen to view, edit, and execute device-generated
certificates.
To open this screen:
1. From the
Switch Main Menu,
select
1. System Configuration
.
2. From the
System Configuration
menu, select
4. Security Settings
.
3. From the
Security Settings Menu
, select
1. SSL Generate Certificate
.
To edit and execute a certificate:
1. Select
Edit
, and then make your changes. Press the
Tab
key to move the cursor from field to
field.
2. Press the
Esc
key to move the cursor to the
Action
list.
3. Select
Execute
to generate the certificate with the new parameters.
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
The following fields are specified:
Public Key Algorithm
Specifies the SSL type
Public Key Length
Specifies the SSL RSA key length. (Range: 512 to 2048)
Common Name (FQCN)
IP address of the Ethernet switch
Department Name
Specifies the department name. (Range: 1 to 32 characters)
Organization Name
Specifies the organization name. (Range: 1 to 32
characters)
Locality or City Name
Specifies the location or city name. (Range: 1 to 32
characters)
State or Province Name
Specifies the state or province name. (Range: 1 to 32
characters)
