SGE2010/SGE2010P Administration Guide
24
System Configuration
Using the Console
Show Certificate
Use the
Show Certificate
screen to display the internal certificate.
To open this screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
4. Security Settings
.
3. From the
Security Settings Menu
, select
2. SSL Show Certificate
.
4. When you finish using this screen, select
Quit
.
Disable Active Management Access Profile
You can use select option 3 on the Security Settings menu to disable the active management
access profile.
To disable the active management access profile:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
menu, select
4. Security Settings
.
3. From the
Security Settings Menu
, select
3. Disable Active Management Access Profile
.
4. When the confirmation message appears, press
Y
to confirm, or press
N
to cancel.
Country Name
Specifies the country name. (Range: 2 to 2)
Validity Term
Specifies number of days certification is valid. (Range: 30 to
3650)
