SGE2010/SGE2010P Administration Guide
28
System Configuration
Using the Console
4. From the
IPv4 Address Configuration
menu, select
1. IPv4 Address Settings
.
To edit the IPv4 address settings:
1. Select
Edit
., and then make the changes. Press the
Tab
key to move the cursor from one
field to the next.
NOTE:
To enable or disable the DHCP client, move the cursor to the field, and then press the
Space Bar
to toggle between ENABLE and DISABLE.
2. Press the
Esc
key to move the cursor to the
Action
list.
3. Select
Save
to save your settings
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
DHCP Renew
You can select this option to renew DHCP.
NOTE:
This option is available only if the interface is configured as a DHCP interface, through
IPv4 Address Settings.
To renew DHCP:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
1. IPv4 Address Configuration
.
4. From the
IPv4 Address Configuration
menu, select
2. DHCP Renew
. The
Operation Complete
message appears.
IPv6 Address Configuration
The
IPv6 Configuration
menu provides access to screens where you can manage the settings for
IPv6 and ISATAP.
