SGE2010/SGE2010P Administration Guide
29
System Configuration
Using the Console
1.
IPv6 Interface Enable (see page 29)
2.
IPv6 Address Settings (see page 30)
3.
IPv6 Address Table (see page 31)
4.
IPv6 ISATAP Enable (see page 31)
5.
IPv6 ISATAP Interface Show (see page 32)
6.
IPv6 Default Gateway (see page 33)
To open this screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
2. IPv6 Address Configuration
.
IPv6 Interface Enable
You can use the
IPv6 Interface Enable
screen to enable or disable the IPv6 interface.
To open this screen:
1. On the
Switch Main Menu
, select
6. IP Configuration
.
2. On the
IP Configuration
menu, select
2. IPv6 Address Configuration
.
3. On the
IPv6 Address Configuration
menu, select
1. IPv6 Interface Enable
.
To edit the IPv6 interface settings:
1. When you finish using this Select
Edit
., and then make the changes. Press the
Tab
key to
move the cursor from one field to the next.
NOTE:
To enable or disable the interface, move the cursor to the field, and then press the
Space Bar
to toggle between ENABLE and DISABLE. If you select ENABLE, a warning
appears. Press the
Enter
key to acknowledge the warning.
2. Press the
Esc
key to move the cursor to the
Action
list.
