SGE2010/SGE2010P Administration Guide
30
System Configuration
Using the Console
3. Select
Save
to save your settings
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
5. When you are finished working on this screen, select
Quit
.
IPv6 Address Settings
You can use the
IPv6 Address - Configuration
screen to edit the IPv6 address settings.
To open this screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
2. IPv6 Address Configuration
.
4. From the
IPv6 Address Configuration
menu, select
2. IPv6 Address Settings
.
To edit the IPv6 address settings:
1. Select
Edit
., and then make the changes. Press the
Tab
key to move the cursor from one
field to the next.
NOTE:
To enable or disable the DHCP client, move the cursor to the field, and then press the
Space Bar
to toggle between ENABLE and DISABLE.
2. Press the
Esc
key to move the cursor to the
Action
list.
3. Select
Save
to save your settings
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
