SGE2010/SGE2010P Administration Guide
32
System Configuration
Using the Console
To edit the ISATAP tunnel settings
1. Select
Edit
., and then make the changes. Press the
Tab
key to move the cursor from one
field to the next.
NOTE:
To enable or disable the ISATAP tunnel, move the cursor to the
Status
field, and then
press the
Space Bar
to toggle between ENABLE and DISABLE.
2. Press the
Esc
key to move the cursor to the
Action
list.
3. Select
Save
to save your settings
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
IPv6 ISATAP Interface Show
You can use the
ISATAP Interface Show
screen to view the interface type and address.
To open this screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
2. IPv6 Address Configuration
.
4. From the
IPv6 Address Configuration
menu, select
5. ISATAP Interface Show
.
