SGE2010/SGE2010P Administration Guide
36
System Configuration
Using the Console
Ping IPv4
You can use the
Ping IPv4
screen to ping an IPv4 address.
To open the screen:
1. From the
Switch Main Menu
, select
1. System Configuration
.
2. From the
System Configuration
Menu
, select
6. IP Configuration
.
3. From the
IP Configuration
menu, select
5. Network Configuration
.
4. From the
Network Configuration
menu, select
1. IPv4 Ping
.
To change the IP address:
1. Select
Edit
, and then enter the IP address.
2. Press the
Esc
key to move the cursor to the
Action
list.
3. Select
Save
to save your changes.
4. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
To begin the ping test:
1. Select
Execute
to begin the ping test.
2. After the ping test is complete, the results of the test appear on the screen.
3. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
