SGE2010/SGE2010P Administration Guide
47
Port Configuration
Using the Console
To configure the ports:
1. Select
Edit
.
2. Proceed as needed:
a. Press the
down
arrow key to scroll down through the list of ports.
b. Press the
right arrow
key to move the cursor from one field to the next within a row.
c. To change a setting, move the cursor to the field, and then press the
Space Bar
until the
desired setting appears.
3. Press the
Esc
key to move the cursor to the
Action
list.
4. Select
Save
to save your settings
5. When the
Operation complete
message appears, press the
Esc
key to move the cursor to the
Action
list.
PoE Settings
You can use the
PoE Settings
screen to specify the priority and PoE settings for each port. You
can use the up or down arrow keys to scroll through all the ports on the Ethernet switch.
To open this screen:
1. From the
Switch Main Menu
, press
3. Port Configuration
.
2. From the
Port Status Men
u, press
2. Poe Settings
.
Field
Settings
Enable
Enable or Disable
Auto Neg.
On or Off
Spd/Dpx
Auto, 10H, 100H, 10F, 100F, 1000F
Flow Ctrl
Auto, On or Off
