Configuring Music on Hold
Configuring a Streaming Audio Server
Cisco Small Business ATA Administration Guide
90
5
Configuring the Streaming Audio Server
Use the following procedure to configure an SAS with an external music source.
STEP 1
Connect an RJ-11 adapter between the music source (a CD player or iPod, for
example) and an FXS port.
STEP 2
Start Internet Explorer, connect to the administration web server, and choose
Admin access with Advanced settings.
STEP 3
Configure the FXS port:
a. Click
Voice tab > FXS
N
, where
N
represents the number of the FXS port
where you connected the cable from the external music source.
b. In the
Subscriber Infomation
section, enter the following settings:
•
Display Name:
Enter an extension number of name for the FXS 1 port, such
as Receptionist Area Fax Machine.
•
User ID:
Enter a three- to four-digit extension number that is not is use by
another extension.
c. In the
Streaming Audio Server (SAS)
section, choose
yes
from the
SAS
Enable
drop-down list.
STEP 4
Click Submit All Changes.
STEP 5
Configure each phone to use this audio source as the MOH server:
a. Click the
PBX Status
link to view the list of phones.
b. In the list, find the phone that you want to configure, and then click the hyperlink
in the
IP Address
column. The Telephone Configuration page appears in a
separate window.
c. Click the
Ext 1
tab.
d. Scroll down to the
Call Feature Settings
section.
e. In the
MOH Server
field, enter the extension number that you assigned to the
FXS port for the streaming audio server.
f.
Click Submit All Changes.
