SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
217
B
Internal Music Script
Script that tells the SPA9000 how to play the downloaded
music file, in the format [section[,section[,…]]], where:
section
= [[
n
](
start
/
end
[/
pause
])][
pause2
]
n
= number of times to repeat the section before moving to
the next section. Default:
1
start
/
end
= starting and 1+ending sample for this section;
note that samples are numbered from 0 to total-length – 1.
You may enter –1 or a very large number if the end of the file
is intended as the ending sample. Default start is 0, and
default end is end of the file.
pause
= number of samples to pause after the ending sample
is played. Default:
0
pause2
= additional number of samples to pause after the
entire n repetitions of the section are played. Default:
0
A maximum of 16 sections can be specified. Samples should
be encoded in G711u format at 8000 samples/second. When
all sections are played, the SPA9000 replays from the first
section again.
Examples:
40000 (plays the entire file, pauses for 5s, then repeats)
2(0/32000),3(32000/100000/4000)2000,(100000/-1)80000
Internal Music Refresh
Intvl
The interval in seconds between refreshing an internal music
session.
Default:
0
(disables session refreshes)
Internal Music LBR Codec Selects one low bit-rate codec as an alternative to G711u
and G711a for playing internal music. Choices are {none,
G729a, G726-16, G726-24, G726-32, G726-40}.
Default:
none
Internal Music Preferred
Codec
Selects which codec is the preferred choice to play internal
music. Choices are {G711u, G711a, Low Bit Rate}. Low Bit
Rate refers to the selected <Internal Music LBR Codec>. If
<Internal Music LBR Codec> is none, G711u is the preferred
codec also.
Default:
G711u
Internal Music Use Pref
Codec Only
Forces the internal music player to use the preferred codec
only.
Default:
no
Downloaded from
www.Manualslib.com
manuals search engine
