SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
231
B
Voice tab > Regional page
Vertical Service Activation Codes section
NOTE
Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
included.
CPC Duration
Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and dial tone applies if the attached
equipment is still off-hook. CPC is disabled if this value is set
to 0. Range: 0 to 1.000 second. Resolution is 0.001 second.
Default:
0
(CPC disabled)
Call Return Code
This code calls the last caller.
Default:
*69
Call Redial Code
Redials the last number called.
Default:
*07
Blind Transfer Code
Begins a blind transfer of the current call to the extension
specified after the activation code.
Default:
*98
Call Back Act Code
Starts a callback when the last outbound call is not busy.
Default:
*66
Call Back Deact Code
Cancels a callback.
Default:
*86
Call Back Busy Act Code Starts a callback when the last outbound call is busy.
Default:
*05
Cfwd All Act Code
Forwards all calls to the extension specified after the
activation code.
Default:
*72
Cfwd All Deact Code
Cancels call forwarding of all calls.
Default:
*73
Cfwd Busy Act Code
Forwards busy calls to the extension specified after the
activation code.
Default:
*90
Downloaded from
www.Manualslib.com
manuals search engine
