SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
255
B
Voice tab > Line page
Subscriber Information section
Refer Target Bye Delay
For the Refer Target Bye Delay, enter the appropriate period
of time in seconds.
Default:
0
Referee Bye Delay
For the Referee Bye Delay, enter the appropriate period of
time in seconds.
Default:
0
Refer-To Target Contact
To contact the refer-to target, select yes. Otherwise, select
no.
Default:
no
Auth INVITE
When enabled, authorization is required for initial incoming
INVITE requests from the SIP proxy.
Display Name
Display name for caller ID.
User ID
User ID assigned by the ITSP, often the same as the DID.
Password
Password for this User ID.
Use Auth ID
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
Default:
no
Auth ID
Authentication ID for SIP authentication.
Call Capacity
Maximum number of calls allowed on this line interface. You
can set a value from 1 to 15, or leave the setting as unlimited.
Note that the SPA9000 does not distinguish between
incoming and outgoing calls when talking about call capacity.
NOTE
Unlimited = 16.
Default:
unlimited
Contact List
List of client stations that the SPA9000 alerts when there is
an incoming call to the line interface from the ITSP.
Cfwd No Ans Delay
Delay, in seconds, before the call forwarding of no-answer
calls feature is triggered.
Default:
20
Downloaded from
www.Manualslib.com
manuals search engine
