Basic Administration of the SPA9000
Connecting to the SPA9000 Administration Web Server
SPA9000 Voice System Administration Guide
27
2
Connecting to the SPA9000 Administration Web Server
To connect to the administration web server, perform the following steps.
NOTE
You should have previously connected and configured the SPA9000 as described
in the
SPA9000 Voice System Installation Guide
.
STEP 1
Start Internet Explorer on a computer that is on the same network as the SPA9000.
STEP 2
Enter the IP address of the SPA9000.
NOTE
To find the IP address of the SPA9000, connect an analog telephone to the
Phone 1 or Phone 2 port on the
SPA9000
. Then lift the receiver of the phone
and press **** on the keypad to access the IVR menu. Press 110# to hear the
IP address.
STEP 3
To view administrative features, click
Admin Login
and then click
Advanced
. By
default, no password is required. For more information, see
“Setting Passwords for
User and Administrator Accounts,” on page 29
.
ALTERNATIVELY:
After starting Internet Explorer, enter:
<SPA9000_ipaddress>
/
admin/advanced
Saving or Discarding Changes SPA9000
Changes can be saved or discarded at any time.
•
Changes are submitted only when you click the
Submit All Changes
button at
the bottom of a page. When changes are saved, the
SPA9000
may reboot,
depending on the type of changes.
•
To discard unsubmitted changes, click the
Undo All Changes
button at the
bottom of the page.
Downloaded from
www.Manualslib.com
manuals search engine
