background image

Basic Administration of the SPA9000

Setting Passwords for User and Administrator Accounts

SPA9000 Voice System Administration Guide

29

2

 

You can switch from User access to Administrator access by clicking the 

Admin 

Login

 link. Likewise, you can switch from Administrator access to User access by 

clicking the 

User Login

 link. If a password is set, you will be prompted to enter the 

password after you click the link.

Setting Passwords for User and Administrator Accounts

The Administrator account name for the SPA9000 is 

admin 

and the User account 

name is 

user

. These account names are case sensitive and cannot be changed. 

NOTE

The system prompts for an Administrator account password only if a password has 
been set. By default, there is no password. You should set a password to protect 
your SPA9000 from unauthorized access.

STEP 1

Connect to the SPA9000 administration web server, and choose Admin access 
with Advanced settings. (See 

“Connecting to the SPA9000 Administration Web 

Server,” on page 27

.)

STEP 2

Click

 Voice tab > System

.

STEP 3

In the 

System Configuration

 section, enter the 

Admin Password

 and the 

User 

Password

, as needed. Up to 39 characters are allowed for the passwords. 

STEP 4

Click 

Submit All Changes

Configuring Basic Settings

This section provides information about the following tasks:

“Setting Up the WAN Connection for the SPA9000,” on page 30

“Setting the Date and Time,” on page 30

“Configuring Daylight Saving Time,” on page 31

“LAN and Application Guidelines,” on page 33

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for Linksys SPA9000































































































































































































































































































Reviews: