Basic Administration of the SPA9000
Configuring Basic Settings
SPA9000 Voice System Administration Guide
32
2
Enter these values in the following format:
<month>/<day>/<weekday>[/
HH[:mm[:ss]]]
•
<month>:
1-12 (January-December)
•
<day>:
1-31
•
<weekday>
: Optional. If included, this value causes the rule to take effect on
a particular day of the week before or after the specified date. Use the
values 1-7 to represent the days Monday (1) through Sunday (7). Omit this
parameter or enter 0 to cause the rule to take effect exactly on the specified
date. If <weekday> is not 0 and the <day> value is positive, then daylight
saving time starts or ends on <weekday> on or after the specified date. If
<weekday> is not 0 and the <day> value is negative, then daylight saving
time starts or ends on <weekday> on or before the specified date.
•
HH:mm:ss
: Optional. The time of day when the setting takes effect, in hours
(0-23), minutes (0-59), and seconds (0-59)
•
<save-time>:
The number of hours (and optionally minutes and/or seconds)
to add to the NTP server time during daylight saving time. Enter a negative (-)
sign before <save-time> if subtraction is desired instead of addition.
Entering the Daylight Saving Time Rule
Follow this procedure to configure daylight saving time on your SPA9000 Voice
System.
STEP 1
Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See
“Connecting to the SPA9000 Administration Web
Server,” on page 27
).
STEP 2
Click
Voice tab > Regional
.
STEP 3
Scroll down to the
Miscellaneous
section.
STEP 4
Enter the rule in the
Daylight Saving Time Rule
field.
STEP 5
Click
Submit All Changes
.
Downloaded from
www.Manualslib.com
manuals search engine
