Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide
42
2
Set Static IP
Address
111
Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
DHCP must be disabled
first, or this value is
considered an “Invalid
Option.” Hang up the phone
after setting the IP address.
The SPA9000 reboots and
the new address takes
effect. Do not attempt to
use IVR option 110
immediately after changing
the IP address. The old IP
address is reported until
the SPA9000 reboots.
Requires password
Check Network
Mask
120
None
IVR announces the current
network mask of SPA.
Set Network
Mask
121
Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
DHCP must be disabled
first, or this value is
considered an “Invalid
Option.”
Requires password
Check Static
Gateway IP
Address
130
None
IVR announces the current
gateway IP address of SPA.
Set Static
Gateway IP
Address
131
Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
DHCP must be “Disable,”
otherwise you hear, “Invalid
Option,” if you try to set this
value.
Requires password
Check MAC
Address
140
None
IVR announces the MAC
address of SPA in hex
string format.
IVR Action
IVR
Menu
Choice
Parameters
Notes
Downloaded from
www.Manualslib.com
manuals search engine
