23
Appendix A: Troubleshooting
Common Problems and Solutions
Compact USB 2.0 10/100 Network Adapter
For Windows XP, do the following:
1. Click
Start
, and right-click
My Computer.
2. Select
Properties
.
3. Click the
Hardware
tab.
4. Click the
Device Manager
button.
5. Click the
+
sign next to Network adapters.
6. Highlight
Linksys Compact USB 2.0 10/100 Network Adapter,
and right-click it.
7. Select
Properties
.
8. Click the
Advanced
tab.
9. Select
Connection Type
. Select the appropriate value for your network device. In most cases,
AutoSense
should be selected.
10.Select
Flow Contro
l. Select the appropriate value for your network device. In most cases,
Enable
should
be selected.
11.Select
Remote Wakeup
(Wake-on-LAN). Select the appropriate value for your network device. In most
cases,
Link up
or
Magic Packet
should be selected.
12.Click the
OK
button.
11. If you are having difficulty installing the Adapter, you may need to remove the Adapter and re-install
it from scratch.
For Windows 98, go to “Appendix C: Starting Over in Windows 98.”
For Windows Millennium, do the following:
1. Right-click the
My Computer
icon, and select
Properties
.
2. Click the
Device Manager
tab.
3. Click the
+
sign next to Network adapters.
4. Highlight
Linksys Compact USB 2.0 10/100 Network Adapter
, and right-click it.
5. Select
Remove
.
6. When you see the
Confirm Device Removal
screen, click
OK
.
7. When you are asked if you want to restart your computer, click
Yes
.
8. Go to “Chapter 6: Windows Millennium Installation and Setup” for installation instructions.
For Windows 2000, do the following:
1. Right-click the
My Computer
icon, and select
Properties
.
2. Click the
Hardware
tab.
3. Click the
Device Manager
button.
4. Click the
+
sign next to Network adapters.
5. Highlight
Linksys Compact USB 2.0 10/100 Network Adapter
, and right-click it.
6. Select
Uninstall
.
7. When you see the C
onfirm Device Removal
screen, click
OK
.
8. Go to “Chapter 7: Windows 2000 Installation” for installation instructions.
