Cisco Linksys WAG200G User Manual Download

Page: 25 / 39

Chapter4

Advanced Configuration

Wreless-G ADSL Home Gateway

Restore

To restore the Gateway’s configuration settings,

click this button and follow the on-screen instructions.

Administration > Factory Defaults

This screen allows you to restore the Gateway’s

configuration to its factory default settings.

Administration > Factory Defaults

NOTE:

Restoring factory defaults deletes all

custom settings. To retain your custom settings,

use the

Administration > Back Up & Restore

screen

to back up the settings before you restore the

factory defaults.

Factory Defaults

Restore Factory Defaults

To reset settings to the default

values, select

Yes

. Any custom Gateway settings you have

saved will be lost when the default settings are restored.
Click

Save Settngs

to apply your changes, or click

Cancel

Changes

to cancel your changes.

Administration > Firmware Upgrade

Administration > Firmware Upgrade

The

Firmware Upgrade

screen allows you to upgrade the

Gateway’s firmware. Do not upgrade the firmware unless

you are experiencing problems with the Gateway or the

new firmware has a feature you want to use.

Firmware Upgrade

Before upgrading the firmware, download the Gateway’s

firmware upgrade file from the Linksys website,

www.linksys.com/international. Then extract the file if

needed.

Please Select a Fle to Upgrade

Click

Browse

and select

the extracted firmware upgrade file.

Upgrade

After you have selected the appropriate file,

click this button, and follow the on-screen instructions.

Language

To use a different language, select one from the

drop-down menu. The web-based utility will switch to the

new language five seconds after your selection is made.

Administration > Reboot

Administration > Reboot

The

Reboot

screen allows you to reboot your Gateway.

Reboot Mode

To reboot your Gateway, select

Hard

Soft

. Choose

Hard

to power cycle the Gateway or

Soft

to restart it without a power cycle. Use a Hard reboot to

restart all applications and processes from a clean state.
To begin the reboot process, click

Save Settngs

. When a

screen appears asking you if you really want to reboot the

Gateway, click

. Click

Cancel

to cancel the reboot.

Summary of Contents for Linksys WAG200G








































Search results

Summary of Contents for Linksys WAG200G

Reviews:

Related manuals for Linksys WAG200G

Brands by name

Popular brands

Cisco Linksys WAG200G, User Manual

Search results

Summary of Contents for Linksys WAG200G

Reviews:

Related manuals for Linksys WAG200G

Brands by name

Popular brands