Install the Hardware
In addition to what comes with Wireless Presentation Gateway, you have to prepare the following
by yourself to start installation:
!
PS2 keyboard
!
Network cable (if use wired network)
!
Wireless LAN module for client-end
!
Data projector or display (depends on your specific needs)
What you should do
!
Connect the PS2 Y cable to the PS2 port on the rear panel
!
Connect the PS2 keyboard and PS mouse to the Y cable
!
Connect the network cable to the RJ45 port on the rear panel
!
Make sure Wireless Presentation Gateway is turned off. Connect the power cord to the power
connector on the rear panel
!
Use the Power Switch on the rear panel to turn on / off Wireless Presentation Gateway
!
Check the PWR LED indicator on the front panel to make sure if the power is turned on
!
Connect the VGA cable to the VGA port on rear panel
!
The COM port on the rear panel is temporarily unused
Front view of Wireless Presentation Gateway
Rear View of Wireless Presentation Gateway