Chapter 3
Advanced Configuration
16
Dual-Band Wireless-N Gigabit Router
Key Renewal
Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal period is
3600
seconds.
RADIUS
This option features WEP used in co-ordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router).
Security Mode > RADIUS
IMPORTANT:
If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key or else
your wireless network will not function properly.
RADIUS Server
Enter the IP Address of the RADIUS
server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is
1812
.
Shared Secret
Enter the key shared between the Router
and the server.
Encryption
Select a level of WEP encryption,
40/64 bits (10 hex digits)
or
104/128 bits (26 hex digits)
.
The default is
40/64 bits (10 hex digits)
.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click
Generate
.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Encryption
Select a level of WEP encryption,
40/64 bits (10 hex digits)
or
104/128 bits (26 hex digits)
.
The default is
40/64 bits (10 hex digits)
.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click
Generate
.
Key 1
If you did not enter a Passphrase, enter the WEP
key manually.
Click
Save Settings
to apply your changes or click
Cancel
Changes
to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network's radius.
Wireless > Wireless MAC Filter
