21
Troubleshooting
Linksys X-Series
The router does not have a coaxial port for the cable connection.
A coaxial cable can connect to only a cable modem . Your modem router works
as a modem with your ADSL Internet, but if you have cable Internet, your
modem router should be connected to a separate cable modem . Insert the
Setup CD into your computer and follow the on-screen instructions to connect
your modem-router to a cable modem .
You want to access the browser-based utility from Cisco Connect.
To enter the browser-based utility from Cisco Connect, follow these steps:
1.
Open Cisco Connect .
2.
On the main menu, click
Router settings
.
3.
Click
Advanced settings
.
4.
Write down the username and password that are displayed . (To help
protect your password, you can copy it to the Clipboard by clicking
Copy
password
.)
5.
Click
OK.
When you try to log into the browser-based utility, your password does not
work.
Your wireless security password also serves as the browser-based utility’s login
password . To see this password:
1.
Open Cisco Connect .
2.
On the main menu, click
Router settings
.
3.
The
Password
is displayed on the left side of the screen .
In Windows XP, you do not see the router in the
My Network Places
screen.
In the
Network Tasks
section, click
Show icons for networked UPnP devices
. If
the router does not appear, follow these instructions:
1.
Go to
Start > Control Panel > Firewall
.
2.
Click the
Exceptions
tab .
3.
Select
UPnP Framework
.
4.
Click
OK
.
WEB
If your questions are not addressed here, refer to the website,
linksys.com/support
