S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-30
Cisco MDS 9000 Family Command Reference
OL-18089-02, Cisco MDS NX-OS Release 4.x
Chapter 2 A Commands
attributes (DMM job configuration submode)
attributes (DMM job configuration submode)
To set the attributes of a data migration job, use the
attributes
command in DMM job configuration
submode. To remove the attributes of a data migration job, use the
no
form of the command.
attributes job_type
{
1
|
2
}
job_mode
{
1
|
2
}
job_rate
{
1
|
2
|
3
|
4
}
job_method
{
1|2
}
no attributes job_type
{
1
|
2
}
job_mode
{
1
|
2
}
job_rate
{
1
|
2
|
3
|
4
}
job_method
{
1|2
}
Syntax Description
Defaults
None.
Command Modes
DMM job configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example sets the job type to storage, the job mode to online, and the job rate to fast:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
dmm module 3 job 1 create
Started New DMM Job Configuration.
Do not exit sub-mode until configuration is complete and committed
switch(config-dmm-job)#
attributes job_type 2 job_mode 1 job_rate 4 job_method 1
switch(config-dmm-job)#
Related Commands
job_type
{
1 | 2
}
Specifies the job type. Specify 1 for a server type job and 2 for a storage type
job.
job_mode
{
1 | 2
}
Specifies the job mode. Specify 1 for an online job and 2 for an offline job.
job_rate
{
1 | 2 | 3 | 4
}
Specifies the job rate. Specify 1 for the default rate, 2 for a slow rate, 3 for a
medium rate, and 4 for a fast rate.
job_method
{
1|2
}
Specifies the job method. Specify 1 for Method 1 and 2 for Method 2.
Release
Modification
3.3(1a)
This command was introduced.
Command
Description
show dmm job
Displays job information.
show dmm srvr-vt-login
Displays server VT login information.