S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-423
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show tlport
show tlport
To display configured TL port information, use the
show tlport
command
show tlport
{
alpa-cache
|
discapp fcid
fcid-id
[
vsan
vsan-id
] [
verbose
] |
interface fc
slot
/
port
{
all
|
private
|
proxied
|
topology
|
unsupported
} |
list
[
vsan
vsan-id
]}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
The
show tlport
command displays the TL port interface configurations. This command provides a list
of all TL ports configured on a box and displays the associated VSAN, the FCID for the port (only
domain and area are valid), and the current operational state of the TL port (up or initializing).
Examples
The following example displays the TL ports in all VSANs.
switch#
show tlport list
-------------------------------
Interface Vsan FC-ID State
------------------------- ------
fc1/16 1 0x420000 Init
fc2/26 1 0x150000 Up
alpa-cache
Displays the contents of the ALPA cache.
discapp
Displays private N port parameters.
fcid
fcid-id
Specifies the FCID of the N port.
verbose
Specifies the verbose mode.
vsan
vsan-id
Specifies the N port VSAN ID. The range is 1 to 4093.
interface
Displays TL ports in the selected interface.
fc
slot
/
port
Specifies the Fiber Channel interface at the specified slot and port.
all
Displays all proxied & private devices on this TL Port.
private
Displays all private devices on this TL Port.
proxied
Displays all proxied devices on this TL Port.
topology
Displays loop topology for this TL Port.
unsupported
Displays all unsupported devices on this TL Port.
list
Displays TL ports in all VSANs.
Release
Modification
1.0(2)
This command was introduced.