![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_212531637.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
27-23
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 27 Z Commands
zoneset (configuration mode)
zoneset (configuration mode)
T
o group zones under one zone set
, use the
zoneset
command in configuration mode. To negate the
command or revert to the factory defaults, use the
no
form of the command.
zoneset
{
activate
name
zoneset-name
vsan
vsan-id
|
clone
zoneset-currentName zoneset-cloneName
|
distribute full vsan
vsan-id
|
name
zoneset-name
vsan
vsan-id
|
rename
current-name new-name
vsan
vsan-id
}
no zoneset
{
activate
name
zoneset-name
vsan
vsan-id
|
clone
zoneset-currentName zoneset-cloneName
|
distribute full vsan
vsan-id
|
name
zoneset-name
vsan
vsan-id
|
rename
current-name new-name
vsan
vsan-id
}
Syntax Description
Defaults
None.
Command Modes
Configuration mode.
Command History
Usage Guidelines
Zones are activated by activating the parent zone set.
The
zoneset distribute full vsan
command distributes the operational values for the default zone to all
zone sets in a VSAN. If you do not want to distribute the operation values, use the
system default zone
distribute full
command to distribute the default values.The default values are used when you initially
create a VSAN and it becomes active.
activate
Activates a zone set
clone
zoneset-currentName
zoneset-cloneName
Clones a zone set from the current name to a new name. Maximum length
of names is 64 characters.
name
zoneset-name
Specifies a name for a zone set. Maximum length is 64 characters.
distribute full
Enables zone set propagation.
vsan
vsan-id
Activates a zone set on the specified VSAN. The range is 1 to 4093.
rename
Renames a zone set.
current-name
Specifies the current fcalias name.
new-name
Specifies the new fcalias name.
Release
Modification
1.0(2)
This command was introduced.
2.0(x)
Added the
rename
option.
2.1(1a)
Added the
clone
option.