![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253368.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-18
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 6 Debug Commands
debug core
debug core
To enable core daemon debugging, use the
debug core
command in EXEC mode. To disable a debug
command use the
no
form of the command or use the
no debug all
command to turn off all debugging.
debug core
{
error
|
flow
}
no debug core
{
error
|
flow
}
Syntax Description
Defaults
Disabled.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the system output when the
debug core flow
command is issued:
switch#
debug core flow
Related Commands
error
Enables debugging for core demon error conditions.
flow
Enables debugging for the core demon flow.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
no debug all
Disables all debugging.
show cores
Displays all the cores presently available for upload from active supervisor.