![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253590.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
8-86
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 8 F Commands
fspf enable vsan
fspf enable vsan
To enable FSPF for a VSAN, use the
fspf enable
command in configuration mode. To disable FSPF
routing protocols, use the
no
form of the command.
fspf enable vsan
vsan-id
no fspf enable vsan
vsan-id
Syntax Description
Defaults
Enabled.
Command Modes
Configuration mode.
Command History
Usage Guidelines
This command configures FSPF on VSANs globally.
Examples
The following example enables FSPF in VSAN 5 and disables FSPF in VSAN 7.
switch
#
#
config terminal
switch(config)#
fspf enable vsan 5
switch(config)#
no fspf enable vsan 7
Related Commands
vsan
vsan-id
Specifies a VSAN ID. The range is 1 to 4093.
Release
Modification
1.0(2)
This command was introduced.
Command
Description
fspf config vsan
Configures FSPF features for a VSAN.
show fspf interface
Displays information for each selected interface.