![background image](http://html.mh-extra.com/html/cisco/mds-9000-series/mds-9000-series_command-reference-manual_21253807.webp)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
16-3
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 16 N Commands
node
node
To configure Cisco SME switch, use the
node
command. To disable this command, use the
no
form of
the command.
node {local |
{
A.B.C.D | X:X::X /n| DNS name
}
}
no node {local |
{
A.B.C.D | X:X::X /n| DNS name
}
}
Syntax Description
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example adds the Cisco SME interface from a local switch:
switch#
config t
switch(config)#
sme cluster c1
switch(config-sme-cl)#
node local
switch(config-sme-cl-node)#
The following example adds the Cisco SME interface from a remote switch:
switch#
config t
switch(config))#
sme cluster c1
switch(config-sme-cl)#
node 171.71.23.33
switch(config-sme-cl-node)#
Related Commands
local
Configures the local switch.
A.B.C.D
Specifies the IP address of the remote switch in IPv4 format.
X:X::X/n
Specifies the IP address of the remote switch in IPv6 format.
DNS name
Specifies the name of the remote database.
Release
Modification
3.2(2)
This command was introduced.
Command
Description
show sme cluster
cluster
name
node
Displays Cisco SME node information about a local or remote switch.