![background image](http://html.mh-extra.com/html/cisco/mem2600-16d/mem2600-16d_configuration-note_67437010.webp)
10 Cisco 2600 Series Memory Upgrade Configuration Note
Upgrading the DRAM DIMMs
Step 5
Position the new DIMM into the DIMM socket as shown in Figure 4.
Figure 4
Removing and Replacing the DRAM DIMM
Step 6
Insert the new DRAM DIMM by sliding the end with the metal fingers into the DIMM
connector socket at approximately a 90-degree angle to the system card. Gently push the
DIMM back into place until the latches on both sides snap into place. Do not use
excessive force because the connector might break.
Step 7
Replace the router cover. Follow the instructions in the section “Closing the Chassis” later
in this document.
10243
1
1
2
1
2
2