6-61
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
delsigdiag
delsigdiag
Delete Signaling Diagnostic
Removes a signaling diagnostics filter table entry or removes some configuration values within a filter
table entry.
Cards on Which This Command Runs
PXM45
Syntax
delsigdiag [index]
[-cldaddr nsap-address]
[-clgaddr nsap-address]
[-cldaddrmask {yes | no}]
[-clgaddrmask {yes | no}]
[-casttype {yes | no}]
[-clrcause {yes | no}]
[-connctgy {yes | no}]
[-inport {yes | no}]
[-outport {yes | no}]
[-maxrec {yes | no}]
[-scope {yes | no}]
[-servctgy {yes | no}]
Syntax Description
index
Specifies the diagnostics index number for the filter table. If no other keywords are
entered, the indexed filter table entry is deleted.
Range: 1–50
-cldaddr
Removes the configured called address from the filter entry.
-clgaddr
Removes the configured calling address from the filter entry.
-cldaddrmask yes returns the called address mask to the default.
Default: no
-clgaddrmask yes returns the calling address mask to the default.
Default: no
-casttype
yes to disable filtering by connection type.
Default: no
-clrcause
yes to disable filtering by the release cause code.
Default: no
-connctgy
yes returns the connection category to the default.
Default: no
