4-26
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
78-13983-08
Chapter 4 Configuring the MWR 1941-DC in an IP-RAN
Verifying the Configuration
!
snmp community private rw
snmp community public ro
snmp-server enable traps
snmp-server trap-source Loopback 0
snmp-server host cw4mw public
!
! Setup useful aliases
!
ip host omcr
OMCR_ip_address
ip host omcip
OMCIP_ip_address
ip host cw4mw
CW4MW_ip_address
ip host btsha-other-0 192.168.146.2
ip host btsha-other-1 192.168.147.2
!
!interface Multilink1
description Backhaul Interface
ip unnumbered loopback 2
cdp enable
ppp multilink
ip ospf hello-interval 1
ip ospf dead-interval 3
ip ospf message-digest-key 1 md5 mymd5pw
!
interface Multilink2
description
ip unnumbered loopback 2
ip mroute-cache
ip mtu 256
cdp enable
ppp multilink
ip rtp header-compression ignore-id
ip rtp compression-connections 700
ppp mux
ppp mux subframe length 64
ppp mux subrame count 15
ppp mux frame 256
ppp mux delay 800
ppp mux pid 0x2067
ip ospf hello-interval 1
ip ospf dead-interval 3
ip ospf message-digest-key 1 md5 mymd5pw
ip pim sparse-mode
ip pim version 2
service-policy output llq-policy
!
interface FastEthernet0/0
ip address 192.168.146.1 255.255.255.0
no ip proxy-arp
no ip mroute-cache
keepalive 1
full-duplex
speed 100
ntp broadcast version 3
standby 1 ip 192.168.146.3
standby 1 timers 1 3
standby 1 priority 100
standby 1 preempt
standby 1 name one
standby 1 track FastEthernet0/1 10
standby 1 track Loopback101 10
standby 1 track Loopback102 5
standby 1 track Multilink2 10
ip ospf hello-interval 1
Summary of Contents for MWR 1941-DC - 1941 Mobile Wireless Router
Page 49: ...P A R T 1 Implementing the MWR 1941 DC Router in an IP RAN ...
Page 50: ......
Page 107: ...P A R T 2 Implementing the MWR 1941 DC Router in a Cell Site DCN ...
Page 108: ......