Table 10: 2-Port 100 Gbps and 10-Port 10 Gbps OTN and Packet Line Card Descriptions
Description
State
LED
The LC is properly seated and
operating correctly.
Green
Status
The LC has one or more errors
detected.
Yellow
No power is applied to the LC.
Off
The card needs attention.
Blue
Attention
The card does not need attention.
Off
The link is up (including internal
loopback).
Green
Port
The link is down or a hardware
failure has occurred.
Yellow
The slice is unprovisioned by
software, the optics module is
missing, or the slice has been
powered down.
Off
3 The Attention LED can be lit only by using the hw-module attention-led location CLI command, which is useful for identifying and verifying which card needs
attention.
Physical Characteristics
•
Height
—
11.05 in. (280.6 mm)
•
Width
—
1.55 in. (39.4 mm)
•
Depth
—
14.25 in. (362 mm)
•
Weight
—
6.57 lb (2.98 kg)
24-Port Low-Rate OTN Line Card
The 24-port low-rate OTN LC (NCS4K-24LR-O-S) supports up to:
•
Twenty-four 1GE interfaces through SFP pluggable optics
•
Sixteen OC-48/STM-16/OTU1 interfaces through SFP pluggable optics
•
Four 10GE/OC-192/OTU2 interfaces through SFP+ pluggable optics
OTU1 and OTU2 ports support generic forward error correction (GFEC). The card supports ODU2, ODU1,
ODU0, and ODUFlex switching functions by interconnecting with the centralized agnostic switch fabric.
Hardware Installation Guide for Cisco NCS 4000 Series
76
Installing Route Processor Cards, Fabric Cards, and Line Cards
24-Port Low-Rate OTN Line Card