Installing the Aid Brackets
This section explains how to install the aid brackets onto the rack. The aid brackets hold the weight of the
chassis while you secure it in the rack.
Prerequisites
Identify the position of the chassis inside the rack to define the aid brackets position.
Tools and Equipment
• Number 2 Phillips screwdriver
• Cisco NCS 4016 installation kit (NCS4K-INST-KIT=)
• Cisco NCS 4009 installation kit (NCS4009-INST-KIT=)
Steps
Procedure
Step 1
Attach the aid brackets to the rack below where the chassis will sit. Tighten the two screws to firmly attach
the brackets to the rack.
Hardware Installation Guide for the Cisco NCS 4000 Series
17
Mounting the Chassis
Installing the Aid Brackets
Summary of Contents for NCS 4000 Series
Page 2: ......