• NCS 4009 installation kit, shipped with the chassis, contains installation aid brackets and screws (Cisco
PID NCS4009-INST-KIT=)
Steps
To mount the chassis in the rack, follow these steps:
Procedure
Step 1
With the chassis on the lift, align the chassis with the rack.
Step 2
Using your mechanical lift, raise the chassis to the height of the rack’s installation aid brackets.
As an example of a suitable lifting device, the figure below, shows a scissor lift raising the chassis.
Take extra care when aligning the bottom of the chassis with the installation aid brackets.
Note
Figure 22: Example—Using a Scissor Lift to Position the Chassis in the Rack
Step 3
Move the chassis. With at least two people, stand in front of the chassis and carefully push the chassis into
the rack.
Step 4
Move the lift aid away from the front of the chassis.
Step 5
Push carefully until the mounting brackets contact the rack mounting bracket with the vertical rack posts.
Someone should be in the rear guiding the chassis into the rack.
Step 6
Insert and partially tighten the screws to attach the chassis mounting brackets to the rack mounting brackets.
Hardware Installation Guide for the Cisco NCS 4000 Series
26
Mounting the Chassis
Mounting the Chassis into a Rack
Summary of Contents for NCS 4000 Series
Page 2: ......